Electronic colposcope manufacturers:what problems about electronic colposcope use process?
Digital electronic colposcopy is used in gynecological examination. It combines modern digital image technology with computer image processing technology, and has the characteristics of clear image, convenient use and accurate inspection. Common cervical cancer screening programs include colposcope examination, in select suspicious cancerous area under colposcope observation cervical biopsy, whether colposcope or other devices, if used for long time, always appear all sorts of problems, the following electronic colposcope manufacturer is introduced: electronic colposcope use process is easy to appear what problem? To help doctors better understand and operate the machine.
The use of electronic colposcope is prone to the following problems:
一、the display of various problems:
1) Color display is not displayed
The main reasons are as follows: 1. The display switch is not on; 2. The computer power is not turned on; 3. Whether the power socket is properly plugged in; The monitor is out of order.
2) After starting the host, the indicator light of the monitor is orange red
The main reasons are as follows: 1. The main board is broken; 2. Memory is bad. 3. Replug or scrub the memory with alcohol;
3) the display screen
Main analysis of the following reasons: 1. Graphics card is broken; 2. Poor graphics card contact; 3. Magnetic interference; 4. Display signal line contact is poor; 5. The true color setting of the display property is incorrect;
4) Display device ghosted
The reasons are as follows: 1. Poor focus; 2. 2. Magnetic interference;
5) display color bias
Main analysis of the following reasons: 1. Graphics card is broken; The monitor is out of order. 3. Magnetic interference;
二、There is no image in the image display area
The main reasons are as follows: 1. Whether the power supply of the camera is well connected; 2. 2. Whether the video cable of the camera is well connected with the computer; 3. Whether to turn on the camera in the software;
三、the problems involved in colposcopy camera
1, the cold light source is not bright:
The main analysis of the following reasons: 1. First check whether the power supply is normal, check the fuse, check the porcelain base; 2. Replace the light bulb or change the cooling source.
2. Zoom in or out
Colposcopy mirrors cannot be enlarged or reduced:
The main reasons are as follows: 1. The line is not in good contact with the host; 2. 2. COM port is not set well; 3. At the same time, press the zoom key behind the mirror;
Lens zoom in and out function cannot be controlled:
Main reasons for analysis: the circuit board in the control panel of colposcope is broken;
The zooming in and out function of the software cannot be controlled:
The main reasons for the analysis: COM port setting error;